CPCDY7.0吨交接式越野叉车-山东博峻智能科技有限公司

CPCDY7.0吨交接式越野叉车

22/07/12 16:35:07



产品型号 指标参数 备注
CPDY70越野叉车 型号model 单位unit CPDY70 高精度门架、
国内一线品牌油缸进口油封
、国内品牌轴承、
品牌高压轮胎质保3年、
加强型前车架。
动力类型Power type
额定负荷Rated load Kg 7000
载荷中心距Load center distance mm 500
尺寸
货叉起升最大高度(带挡货架)Maximum lifting height of fork (shelf with stopper) mm 4260
最大提升高度Maximum lifting height mm 3000
门架全高(货叉落地,门架垂直)Full height of gantry (fork landing.gantry vertical) mm 2530
自由提升高度Free lifting height mm 150
挡货架高度(门架货叉面算起)Height of blocking rack (calculated from the fork surface of gantry) mm 1196
座椅面至护顶架距离Distance from seat surface to roof protection frame mm 870
全高(护顶架)Full height (roof protection frame) mm 2810
全长(不带货叉)Ful length(without fork) mm 5030
前悬距Front overhang distance mm 684
后悬距Rear overhang mm 1520
轴距wheelbase mm 2628
牵引销高度Towing pin height mm 820
最小离地间隙(门架处)Minimum ground clearance (at gantry) mm 356
全宽Full width mm 2190
叉距外侧(最大/最小)Fork pitch outside(max/min) mm 1350/300
轮距(前轮/后轮)Track width(front/rear) mm 1700/1700
最小转弯半径外侧Outside of minimum turning radius mm 5800
最小转弯半径内侧Inside of minimum turning radius mm 3900
最小直角半径宽度Minimum right angle radius width mm 5900
门架倾角(前/后)Gantry inclination (front/rear) mm 前8后10
货叉尺寸Fork size mm 1070*50*150
性能
最高行驶速度(满载/空载)Maximum driving speed(full load/no load) Km/h 30/35
速度提升(满载/空载)Speed increase(full load/no load) mm/s 350/500
速度下降(满载/空载)Speed decrease(full load/no load) mm/s 550/450
最大牵引力(满载/空载)Maximum traction (full load/no load) KN 65
最大爬坡能力(满载/空载)Maximum climbing capacity (full load/no load) % 20/30
质量
总重Total weight Kg 6800
重量分配满载(前/后)Weight distribution full load(front/rear) Kg 12150/950
重量分配空载(前/后)Weight distribution empty(front/rear) Kg 2250/3850
车轮和轮胎
车轮数量X/驱动轮Number of wheels x/drive wheel 4X/4
轮胎类型(前/后)Tire type(front/rear) 充气胎
前轮轮胎Front tire 16/70-20
后轮轮胎Rear tire 16/70-20
行车制动器Service brake 液压制动
停车制动器Parking brake 机械
驱动、传动控制装置
发动机型号Engine model YCD4T33T6-115
减速箱型号Reducer model 280
发动机功率Engine power KW 90KW
发动机扭矩/转速Engine torque/speed N.M 415/1800
变速箱变档数Number of transmission shifts 前3后3