Product characteristics:
Forklift truck is an industrial transport vehicle. It refers to various wheeled transport vehicles which carry out loading and unloading, stacking and short-distance transportation of pallet cargo. Industrial transport vehicles are widely used in ports, stations, airports, freight yards, factory workshops, warehouses, distribution centers and distribution centers. They are essential equipment in pallet transportation and container transportation for pallet cargo handling and handling in cabins, carriages and containers.
Because the electric forklift truck works on the battery, the operation and maintenance of the battery are closely related to the efficiency and life of the forklift truck. Daily attention must be paid to check whether the electrolyte is sufficient. When the level of the electrolyte is below the rated value, too little electrolyte will lead to heat damage of the battery, thus shortening the service life of the battery. The operation of electric forklift truck may pollute the surface of storage battery. Always pay attention to keep the surface of storage battery clean and dry. If it is not too dirty, it can be wiped clean with wet cloth. If it is very dirty, it is necessary to unload the storage battery from the truck and make it dry naturally after washing with water. The dirty surface of the battery will cause leakage. It is necessary to inspect the easily observed areas such as battery terminal, conductor, cover, whether there is corrosion caused by oxidation at the junction of terminal and conductor, at the same time, check whether the cover is deformed, whether there is heating phenomenon, and eliminate the problem in time.
Technical parameters of electric balanced forklift truck:
characteristic |
1.1 |
manufacturer |
|
|
SDBJ |
1.2 |
model |
|
|
CPD50 |
|
1.3 |
drive |
|
|
electric |
|
1.4 |
Manipulation form |
|
|
Driver type |
|
1.5 |
load capacity |
Q |
Kg |
5000 |
|
1.6 |
Load center |
C |
mm |
500 |
|
1.8 |
Suspension |
X |
mm |
500 |
|
1.9 |
Wheelbase |
Y |
mm |
2000 |
|
weight |
2.1 |
Total weight (with battery) |
|
Kg |
8000 |
2.2 |
Front/rear axle load, load |
|
Kg |
|
|
2.3 |
Front/rear axle load, no load |
|
|
|
|
wheel |
3.1 |
Wheel category |
|
|
SE |
3.2 |
Front wheel size |
|
|
28×12.5-15 |
|
3.3 |
Rear wheel size |
|
|
21×8/-9 |
|
3.5 |
Number of front/rear wheels, ×= drive wheel |
|
|
2×/2 |
|
3.6 |
Front track |
b10 |
mm |
1120 |
|
3.7 |
Rear track |
b11 |
mm |
1015 |
|
size |
4.1 |
Forward tilt angle / backward tilt angle |
α/β |
° |
5/8 |
4.2 |
Gantry minimum height |
h1 |
mm |
2105 |
|
4.3 |
Free rise |
h2 |
mm |
130 |
|
4.4 |
Lifting height |
h3 |
mm |
3000 |
|
4.5 |
Maximum height of the gantry (off the ground) |
h4 |
mm |
4000 |
|
4.7 |
Roof guard height |
h6 |
mm |
2340 |
|
4.8 |
Seat height (off the ground) |
h7 |
mm |
1170 |
|
4.12 |
Traction pin height |
h10 |
mm |
490 |
|
4.19 |
full length |
I1 |
mm |
4045 |
|
4.20 |
Full length (excluding forks) |
I2 |
mm |
2975 |
|
4.21 |
Total width |
b1 |
mm |
1500 |
|
4.22 |
Fork size |
s/e/I |
mm |
50/150/1070 |
|
4.23 |
Compliant with ISO2328 fork frame/frame form A, B |
|
|
3A |
|
4.24 |
Fence margin |
b3 |
mm |
1375 |
|
4.31 |
Minimum ground clearance at the gantry |
m1 |
mm |
150 |
|
4.32 |
Minimum ground clearance at the frame |
m2 |
mm |
130 |
|
4.33 |
Channel width (1000 × 1200 horizontal tray) |
Ast |
mm |
|
|
4.34 |
Channel width (800 × 1200 horizontal tray) |
Ast |
mm |
|
|
4.35 |
Minimum turning radius |
Wa |
mm |
2100 |
|
4.36 |
Inward turning radius |
b13 |
mm |
560 |
|
performance |
5.1 |
Travel speed, load / no load |
|
Km/h |
14/16 |
5.2 |
Lifting speed, load / no load |
|
mm/s |
400/500 |
|
5.3 |
Falling speed, load / no load |
|
mm/s |
550/450 |
|
5.6 |
Maximum traction, S2=5min, load/unloaded |
|
KN |
20/20 |
|
5.8 |
Maximum climbing ability, S2=5min, load/unloaded |
|
% |
19/20 |
|
5.9 |
Acceleration time, load / no load (0-10m) |
|
s |
|
|
5.10 |
Brake form |
|
|
Mechanical / hydraulic |
|
drive |
6.1 |
Drive motor power,S2=60min |
|
KW |
11.5×2 |
6.2 |
Lifting motor power,S3=15%ED |
|
KW |
24 |
|
6.4 |
battery capacity |
|
V/Ah |
80/600 |
|
6.5 |
Battery weight |
|
Kg |
880 |
|
other |
7.1 |
Electronic control system |
|
|
AC |
7.2 |
Hydraulic system working pressure |
|
Mpa |
18 |
|
7.3 |
Driver noise |
|
dB(A) |
≤75 |
|
7.4 |
Traction connection |
|
|
PIN |
整车五年质保
厂家直销,用电系统质保解决后顾之忧
整车系统配备远程诊断和调控整车标准配置
意大利博索尼叉步齿售后服务保障体系
专业团队,7X24无忧售后服务