Product characteristics:
Electric forklift is a forklift that operates by electricity, most of which work for batteries. Batteries are one kind of batteries. Their function is to store limited electric energy and use it in suitable places. Its working principle is to convert chemical energy into electrical energy. This kind of battery is also contained in the battery of electric forklift truck. Note: Batteries should not be laid out horizontally! Because the battery's interior is usually 22-28% dilute sulfuric acid. When the battery is being discharged, the electrolyte can submerge the plate and there is still a little space left. If the battery is transversely discharged, a part of the plate will be exposed to the air, which is very harmful to the plate of the battery. Moreover, the observation holes of the battery or the top of the battery have exhaust ports to communicate with the outside world, so the electrolyte can easily flow out of the battery by transverse discharging.
1. Maintain proper start-up speed at start-up, not too fast.
2. Pay attention to the voltage of the voltmeter. If the voltage is lower than the limit voltage, the forklift truck should stop running immediately.
3. Forklift trucks are not allowed to change the driving direction by pulling the direction switch in order to prevent burning out the electrical components and damaging the gears.
4. Driving and lifting should not be carried out at the same time.
5. Attention should be paid to the driving system, whether the sound of the steering system is normal or not, if abnormal sound is found, the malfunction should be eliminated in time, and the operation with illness should be strictly prohibited.
6. Slow down in advance when changing.
7. When working on poor roads, the importance of the road should be reduced appropriately and the driving speed should be reduced.
Technical parameters of electric balanced forklift truck:
characteristic
1.1
manufacturer
SDBJ
1.2
model
CPD20B
1.3
drive
electric
1.4
Manipulation form
Driver type
1.5
load capacity
Q
Kg
2000
1.6
Load center
C
mm
500
1.8
Suspension
X
mm
425
1.9
Wheelbase
Y
mm
1350
weight
2.1
Total weight (with battery)
Kg
3600
2.2
Front/rear axle load, load
Kg
4901/699
2.3
Front/rear axle load, no load
1672/1928
wheel
3.1
Wheel category
SE
3.2
Front wheel size
18×7-8
3.3
Rear wheel size
15×4.5-8
3.5
Number of front/rear wheels, ×= drive wheel
2×/2
3.6
Front track
b10
mm
930
3.7
Rear track
b11
mm
955
size
4.1
Forward tilt angle / backward tilt angle
α/β
°
5/8
4.2
Gantry minimum height
h1
mm
2070
4.3
Free rise
h2
mm
140
4.4
Lifting height
h3
mm
3000
4.5
Maximum height of the gantry (off the ground)
h4
mm
3990
4.7
Roof guard height
h6
mm
2195
4.8
Seat height (off the ground)
h7
mm
1100
4.12
Traction pin height
h10
mm
460
4.19
full length
I1
mm
3170
4.20
Full length (excluding forks)
I2
mm
2100
4.21
Total width
b1
mm
1070
4.22
Fork size
s/e/I
mm
40/120/1070
4.23
Compliant with ISO2328 fork frame/frame form A, B
2A
4.24
Fence margin
b3
mm
1100
4.31
Minimum ground clearance at the gantry
m1
mm
95
4.32
Minimum ground clearance at the frame
m2
mm
90
4.33
Channel width (1000 × 1200 horizontal tray)
Ast
mm
3646
4.34
Channel width (800 × 1200 horizontal tray)
Ast
mm
3845
4.35
Minimum turning radius
Wa
mm
2020
4.36
Inward turning radius
b13
mm
555
performance
5.1
Travel speed, load / no load
Km/h
20/20
5.2
Lifting speed, load / no load
mm/s
420/450
5.3
Falling speed, load / no load
mm/s
500/400
5.6
Maximum traction, S2=5min, load/unloaded
KN
12.7/9.0
5.8
Maximum climbing ability, S2=5min, load/unloaded
％
20/20
5.9
Acceleration time, load / no load (0-10m)
s
4.9/4.3
5.10
Brake form
Mechanical / hydraulic
drive
6.1
Drive motor power，S2=60min
KW
4.5×2
6.2
Lifting motor power，S3=15％ED
KW
11.5
6.4
battery capacity
V/Ah
48/540
6.5
Battery weight
Kg
540
other
7.1
Electronic control system
AC
7.2
Hydraulic system working pressure
Mpa
14.2
7.3
Driver noise
dB(A)
≤75
7.4
Traction connection
PIN
整车五年质保
厂家直销，用电系统质保
解决后顾之忧
整车系统配备远程诊断和调控
整车标准配置
意大利博索尼叉步齿
售后服务保障体系
专业团队，7X24无忧售后服务
